KC4011X1-BM1 12P6884X052

产品标题:KC4011X1-BM1 12P6884X052轴振动监视器

型号： KC4011X1-BM1 12P6884X052

品牌：艾默生

　产品介绍

　　型号名称：IC754CGL06CTD-EE 能够合作国外主流的操控器构成一体化的DCS体系，完全能够习惯DCS体系对软件的诸多要求，在DCS中能够作为操作员站、工程师站、前史站、事情服务器、报务器、文件服务器，构成一个完好的DCS体系，例如产品合作国内厂家在电厂300MW机组产品规划到达的要求如下：

　　网络节点数量：操控站：32对，上位节点：40个；

　　画面数量>4096，刷新周期<1s；

　　实时数据>120000点，前史数据>65535；

　　分布式的前史归档、报警与事情办理。

　　二、一体化集成1、操控器集成

　　产品的点目标能够直接与DCS功用块相对应，保证参数快速引用和映像，组态完DCS操控站后，参数方便主动导入；

　　工程师站支持愈加方便的工程远程部署，方便保护网络各个节点。

　　2、工程模板

　　工程模板支持规范的监控架构，DCS软件中的规范的菜单、工具条、趋势组、报警、事情、组画面、细目画面 、实时和前史报表、用户办理等进行构建后悉数主动生成一个工程模板，供用户运用。

　　3、画面模板

　　提供了如PID调节器面板、模拟、开关手操等操作面板，使组态进程愈加快速，做到了软硬件一体化。

　　操控面板：对操控方案中的操控功用块提图形操作面板，操控功用快的参数能够主动映射，比方PID操控的FBD块与图形的操控面板进行参数主动创立。

　　窗口模板：主要是窗口模板，对同类共性操作窗口进行“一次”组态，如各种操作面板画面的构建。

　　组或细目画面：主动生成组画面，只需要输入相关“工艺位号”即可。DCS模板

　　Product introduction

　　Model name: IC754CGL06CTD-EE Be able to cooperate with foreign mainstream controllers to form an integrated DCS system, and be fully used to many requirements of special DCS system for software. In DCS, it can be used as operator station, engineer station, previous history station, event server, alarm server and file server to form a complete DCS system. For example, the requirements of domestic manufacturers in the product planning of 300MW unit of power plant are as follows:

　　Number of network nodes: 32 pairs of control stations, 40 upper nodes;

　　Number of pictures > 4096, refresh cycle < 1s;

　　Real time data > 120000 points, previous history data > 65535;

　　Distributed pre history archiving, alarm and affairs handling.

　　2、 Integration 1. Manipulator integration

　　The point target of the product can directly correspond to the DCS function block to ensure the rapid reference and mapping of parameters. After the DCS control station is configured, the parameters can be easily imported actively;

　　The engineer station supports more and more convenient project remote deployment, which is convenient to protect each node of the network.

　　2. Engineering template

　　The project template supports the standardized monitoring architecture. After the standardized menus, toolbars, trend groups, alarms, events, group pictures, detailed pictures, real-time and previous history reports, user handling, etc. in the DCS software are constructed, all of them actively generate a project template for users to use.

　　3. Picture template

　　It provides operation panels such as PID regulator panel, simulation, switch manual operation and so on, which makes the configuration process faster and achieves the integration of software and hardware.

　　Control panel: provide a graphic operation panel for the control function block in the control scheme, and the parameters with fast control function can be actively mapped. For example, the FBD block controlled by PID can be actively created with the graphic operation panel.

　　Window template: it is mainly a window template, which carries out "one-time" configuration for similar common operation windows, such as the construction of various operation panel screens.

　　Group or detail screen: actively generate group screen, just input relevant "process tag number". DCS template

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权