3500/15-05-05-R0 通用于可编程

产品标题:3500/15-05-05-R0 通用于可编程控制器交流电源模块

型号： 3500/15-05-05-R0

品牌：本特利

产品介绍

　　型号名称：3500-44-01-00输出模块

　　一、用途特性

　　用途：本测湿仪使用于木质纤维类物质，含水率在0～50%的物体，如竹制品、木器、中药材、烟草、棉花、纸张、皮革、纺织品、粮食、农作物、化工原料等物品百分含水率的快速测定。

　　特性：该仪表采用的电池波传感技术，产生一个三维立体磁场，能通过简单的接触，快速测量出被测物的含水率，并且不会损坏被检测的材料。因此，它是准确度的水分测试仪表。

　　二、使用方法

　　1、先选择树种开关（见附表①或者附表②）。

　　2、将仪器侧面开关向上推，液晶数字显示00.0。

　　3、将仪器平放在测试板上，数字稳定后所显示的数字为被测物的含水率。仪器扫描深度为30mm,测量单板叠成10mm以再进行测量。（测量时，手须离开仪表，否则会影响测量结果。）

　　4、更换电池：数字显示跳动或无显示时，将后端盖打开，更换一节9V（6F22）型电池。

　　三、维修保养

　　1、如仪表开机后显示不为零，请打开电池盖，取出电池，机内有一零位调节器，如显示为负值，用小螺丝刀顺时针调节；反之，逆时针调节。

　　2、本仪表为仪器，各部分要有良好的的绝缘性，使用保存时要注意防潮防尘，保持干燥清洁，以免影响测量的准确性。

　　Product introduction

　　Model name: 3500-44-01-00

　　1、 Usage characteristics

　　Purpose: this moisture meter is used for the rapid determination of the percentage moisture content of objects with wood fiber substances and moisture content of 0 ~ 50%, such as bamboo products, woodwork, traditional Chinese medicine, tobacco, cotton, paper, leather, textiles, grain, crops, chemical raw materials and so on.

　　Features: the instrument adopts advanced battery wave sensing technology to generate a three-dimensional magnetic field, which can quickly measure the moisture content of the tested object through simple contact, and will not damage the tested material. Therefore, it is a moisture test instrument with high accuracy.

　　2、 Method of use

　　1. First select the tree species switch (see attached table ① or attached table ②).

　　2. Push the side switch of the instrument upward, and the LCD digital display is 00.0.

　　3. Place the instrument flat on the test board. After the number is stable, the displayed number is the moisture content of the tested object. The scanning depth of the instrument is 30mm, and the measuring veneer is stacked into 10mm for measurement. (during measurement, hands must leave the instrument, otherwise the measurement results will be affected.)

　　4. Replace the battery: when the digital display jumps or there is no display, open the rear end cover and replace a 9V (6f22) battery.

　　3、 Maintenance

　　1. If the display of the instrument is not zero after startup, please open the battery cover and take out the battery. There is a zero position regulator in the machine. If the display is negative, adjust it clockwise with a small screwdriver; Conversely, adjust counterclockwise.

　　2. This instrument is a high-precision instrument. All parts should have good insulation. Pay attention to moisture and dust prevention when using and saving, and keep dry and clean, so as not to affect the accuracy of measurement.

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权