KC3011X1-BA1 12P6749X062

产品标题:KC3011X1-BA1 12P6749X062模拟输出模块

型号：KC3011X1-BA1 12P6749X062

品牌：艾默生

                                                                 产品详情资料：

在DPM1的数据传输阶段，系统对故障的反应，例如从机故障，由通过CI854/CI854A设置选项卡中的BP标志配置定义的“自动清除模式”确定。如果启用此参数，当从机***准备好进行用户数据传输时，DPM1将所有分配的从机的输出切换到故障状态。DPM1随后切换到清除状态。如果禁用此参数，即使发生故障，DPM1也会保持在操作状态，用户可以控制系统的反应。同步和冻结模式除了DPM1（DP Master Class 1）和分配的从机之间的正常循环通信外，主机还可以通过多播向一组从机发送控制命令Sync和冻结。使用sync命令，被寻址的从设备将把输出冻结在当前状态。当输出状态保持不变时，主机接收的新输出值将被存储。在接收到下一个同步命令之前，存储的输出数据不会发送到输出。使用“unsync”命令终止同步模式。

                          产品英文详情资料：

The reaction of the system to a fault during the data transfer phase of the DPM1, for example a failure of a slave, is determined by the “Auto Clear Modus” defined via the BP flag configuration in the settings tab for CI854/CI854A. If this parameter is enabled, the DPM1 switches the outputs of all assigned slaves to a fail-safe state the moment a slave is no longer ready for user data transmission. The DPM1 subsequently switches to the clear state. If this parameter is disabled, the DPM1 retains in the operate state even in the event of a fault and the user can control the reaction of the system.

Sync and Freeze Mode In addition to the normal cyclic communication between the DPM1 (DP Master Class 1) and the assigned slaves, a master can send the control commands sync and freeze via multicast to a group of slaves. With the sync-command the addressed slaves will freeze the outputs in their current state. New output values received by the master will be stored while the output states remain unchanged. The stored output data are not sent to the outputs until the next sync command is received. The Sync mode is terminated with the “unsync” command.

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。