531X301DCCAFG2用于主驱动器

产品标题:531X301DCCAFG2用于主驱动器 

型号： 531X301DCCAFG2

品牌：GE

                                                                                 产品详情资料：

对齐目标方向1.选择要更改其方向的目标。2.单击“对齐目标方向”以打开对话框。3.在“参考”框中，通过首先在框中单击，然后从图形视图或布局浏览器中选择目标，***要将其方向用作参考的目标。4.在“对齐轴”框中，选择要将其方向从参考目标复制到选定目标的轴。5.在“锁定轴”框中，选择要旋转目标的轴。此轴的方向不会在目标上更改。例如，如果所有目标的Z轴方向垂直于工件表面，并且希望保持此方向，则应锁定Z轴。6.单击应用。

对齐目标方向1.选择要更改其方向的目标。2.单击“对齐目标方向”以打开对话框。3.在“参考”框中，通过首先在框中单击，然后从图形视图或布局浏览器中选择目标，***要将其方向用作参考的目标。4.在“对齐轴”框中，选择要将其方向从参考目标复制到选定目标的轴。5.在“锁定轴”框中，选择要旋转目标的轴。此轴的方向不会在目标上更改。例如，如果所有目标的Z轴方向垂直于工件表面，并且希望保持此方向，则应锁定Z轴。6.单击应用。

                          产品英文详情资料：

Aligning target orientation 1. Select the targets whose orientation you wish to change. 2. Click Align Target Orientation to bring up a dialog box. 3. In the Reference box, specify the target whose orientation you want to use as reference, by first click in the box and then selecting the target either from the graphics view or the Layout browser. 4. In the Align Axis box, select the axis whose orientation you want to copy from the reference target to the selected ones. 5. In the Lock Axis box, select the axis to rotate the target around. The orientation of this axis will not be changed on the targets. For example, if the Z axis of all targets are orientated normally to the surface of the work piece and you want to keep it this way, you should lock the Z axis. 6. Click Apply.

Aligning target orientation 1. Select the targets whose orientation you wish to change. 2. Click Align Target Orientation to bring up a dialog box. 3. In the Reference box, specify the target whose orientation you want to use as reference, by first click in the box and then selecting the target either from the graphics view or the Layout browser. 4. In the Align Axis box, select the axis whose orientation you want to copy from the reference target to the selected ones. 5. In the Lock Axis box, select the axis to rotate the target around. The orientation of this axis will not be changed on the targets. For example, if the Z axis of all targets are orientated normally to the surface of the work piece and you want to keep it this way, you should lock the Z axis. 6. Click Apply.

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。