DS200TBQCG1A RST 扩展模拟

产品标题: 励磁IGCT可控硅DS200TBQCG1A RST 扩展模拟 I/O板 Mark V系列

型号： DS200TBQCG1A 

品牌：GE

                                                                  产品详情资料：

继电器应按照国家法规和说明进行定期测试。制造商建议测试间隔五年。建议将该测试作为二次测试进行。然后在测试过程中断开继电器。但是，建议同时检查信号和跳闸电路的状况。校闭合触点5 kΩ>0.25 W闭合触点检测1.8 mA<i<6 ma="" 1开路触点检测0.7="" ma<i<1.8="" 2开路检测i<0.7="" 16="" 24="" 8.57="">R>4 kΩ（其中R=总回路电阻）注2：在24 V直流时，等于26.7 kΩ>R>10 kΩ开路电压24 V直流闭合触点电流7 mA±5%，打开状态检测后3.5 mA±5%，关闭状态检测后闭合触点检测I>2.81mA 1打开触点检测I<1.8mA 2）输入滤波器一阶低通16 Hz注1：在24 VDC时，等于R<8.57 KΩ（其中R=总回路电阻）注2：在24 V DC时，等于26.7 KΩ>R>10 KΩW

                         产品英文详情资料：

The relay should be subject to regular tests in accordance with national regulations and instructions. The manufacturer recommends an interval of five years between the tests. The test is recommended to be carried out as a secondary test. Then the relay has to be disconnected during the test procedure. However, it is recommended to check the condition of the signal and trip circuits as well.Closed Contact 5 kΩ > 0.25 W Closed contact detection 1.8mA <i <6="" ma="" 1="" open="" contact="" detection="" 0.7="" <i="" <1.8="" 2="" wire="" detect="" i="" <0.7="" 16="" 24="" input="" filter="" first-order="" low-pass="" hz="" note="" 1:="" at="" equates="" to="" 8.57=""> R > 4 KΩ (where R = total loop resistance) Note 2: At 24 VDC, equates to 26.7 KΩ > R > 10 KΩ Open Voltage 24 VDC Closed contact current 7 mA ± 5%, after open state detection 3.5 mA ± 5%, after closed state detection Closed contact detection I > 2.81mA 1 Open contact detection I <1.8mA 2) Input filter First-order low-pass 16 Hz Note 1: At 24 VDC, equates to R <8.57 KΩ (where R = total loop resistance) Note 2: At 24 VDC, equates to 26.7 KΩ > R > 10 KΩ

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。