128275-01F 用TSI汽轮机

产品标题: 本特利 128275-01F 扩展填充板 用TSI汽轮机

型号： 128275-01F

品牌： 本特利

详情资料

本特利bently3300XL8mm传感器系统用于机械的轴振动、轴位移、键相位和转速测量。广泛应用于发电厂、炼油厂、化工厂、钢铁厂、水泵厂、风机厂等行业企业。本特利（BentlyNevada）振动传感器用于检测汽轮机、水轮机、鼓风机、压缩机、空分机、齿轮箱、水泵等大型旋转机械轴的振动在线测量和保护。 
本特利bently3300XL8mm电涡流传感器系统包括：探头、延伸电缆、前置器
系统长度：5或9米（包括延长电缆）或1米（仅探头）。
电源：无栅时要求-17.5Vdc至-26Vdc，电流***大为12mA，
线性范围：2mm
推荐的间隙设定值：1.27mm
灵敏度（ISF）：7.87V/mm(200mV/mil)
频率响应：0-10kHz：从3300XL前置器到监测器的***大长度为305米现场联线。
轴直径推荐***小：76.2mm(3in)
探头工作温度：标准探头-52°C至+177°C；高温探头-52°C至+218°C
延长电缆温度：标准电缆-52°C至+177°C；高温电缆-52°C至+260°C
前置器工作温度：-52°C至+100°C
线性范围、精度和温度稳定性。
所有3300XL8mm接近传感器系统都提供了这一性能水平，并支持探头、延长电缆和位移检测器传感器的完全互换性，无需匹配或台架校准单个部件。

英文资料

The Bently 3300XL8mm sensor system is used for measuring shaft vibration, shaft displacement, keyphase, and rotational speed in machinery. Widely used in industries such as power plants, refineries, chemical plants, steel plants, water pump plants, and fan factories. Bently Nevada vibration sensors are used for online vibration measurement and protection of large rotating machinery shafts such as steam turbines, water turbines, blowers, compressors, air separators, gearboxes, and water pumps.

Bently 3300XL8mm eddy current sensor system includes: probe, extension cable, and proximitor

System length: 5 or 9 meters (including extension cable) or 1 meter (probe only).

Power supply: When there is no safety barrier, it is required to operate from -17.5Vdc to -26Vdc, with a current of up to 12mA,

Linear range: 2mm

Recommended clearance setting value: 1.27mm

Sensitivity (ISF): 7.87V/mm (200mV/mil)

Frequency response: 0-10kHz: 305 meters of field wiring from the 3300XL Proximitor to the Monitor.

Recommended shaft diameter * * * Small: 76.2mm (3in)

Probe operating temperature: standard probe -52 ° C to+177 ° C; High temperature probe -52 ° C to+218 ° C

Extension cable temperature: standard cable -52 ° C to+177 ° C; High temperature cable -52 ° C to+260 ° C

Proximitor operating temperature: -52 ° C to+100 ° C

Linear range, accuracy, and temperature stability.

All 3300XL8mm proximity sensor systems provide this level of performance and support complete interchangeability of probes, extension cables, and displacement detector sensors without the need for matching or bench calibration of individual components.

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。