前卡+后卡 3500/92-02-01-00

产品标题: 本特利3500通讯模块 前卡+后卡 3500/92-02-01-00

型号： 3500/92-02-01-00

品牌： 本特利

详情资料

本特利模块3500/92-02-01-00(前板136180-01) (后板133323-01) 

3500框架还有一种 迷你型(宽度是12” 而不是19”)*；但它 只提供7个插槽，而 不是14个。与全尺寸框架一样，它的*左端插槽为电 源和框架接口模块预留。迷你型框架可以采用面板安 装或通过可选的连接板安装于19”EIA 导轨中，它不
能采用壁板安装形式。

电源
3500/15有交流和直流两种形式，与各地电压源兼容。它采用行噪声滤波做为标准形式。框架中可使用 单电源或当电源不允许中断时使用冗余双电源。它们 分别位于框架*左端插槽的上部和下部。冗余电源可 以采用不同的电压源供电，如主电源由120Vac电源供电，而备份电源由不间断24Vdc电源供电。

每个电源可以单独为整个框架及其模块供电。当采用 冗余电源形式时，一个作为框 架的主电源，另外一个作为备 份，当主电源发生故障时，备 份电源立即自动形使主电源模 块功能，避免框架运行发生中断。
3500/15电源模块具有自检功 能，可以监测是否所有的输出 电压符合规范，并通过电源模 块*板上的绿色“Supply OK”发光二极管（LED）显示出来。

框架接口模块
框架接口模块 (RIM) 是3500框架与组态、显示和状 态监测软件连接的主要接口。每个框架要求有一个 RIM，安装在与电源模块紧邻的框架插槽中。RIM支持 专有协议，该协议使用3500组态软件1对框架进行组 态，并提取框架数据和状态信息用于3500操作者显示 软件。当Bently Nevada状态监测软件与3500系统配合 使用时，RIM还通过我们专有的数据管理者® 协议连接 到相应的外部通讯处理器，如TDXnet™、TDIX或DDIX
等。RIM位于紧邻电源的框架插槽中。RIM中包含系统OK继电器2 ，由RIM自身以及框架中其它模块的NOT OK状态触发。

英文资料

Bentley Module 3500/92-02-01-00 (Front Plate 136180-01) (Rear Plate 133323-01)

There is also a mini version of the 3500 frame (with a width of 12 "instead of 19") *; But it only provides 7 slots, not 14. Like the full size frame, its left slot is reserved for the power supply and frame interface module. The mini frame can be installed in a panel or through an optional connection board in a 19 "EIA rail, and it does not

Can be installed in the form of wall panels.

source

The 3500/15 comes in two forms: AC and DC, and is compatible with voltage sources around the world. It adopts row noise filtering as the standard form. Single power supply or redundant dual power supply can be used in the framework when power interruption is not allowed. They are located in the upper and lower parts of the left slot of the frame *. Redundant power supplies can be powered by different voltage sources, such as the main power supply being powered by a 120Vac power supply, and the backup power supply being powered by an uninterrupted 24Vdc power supply.

Each power supply can independently power the entire framework and its modules. When using a redundant power supply form, one serves as the main power supply for the framework and the other serves as a backup. When the main power supply fails, the backup power supply immediately automatically activates the main power module function to avoid interruption of the framework's operation.

The 3500/15 power module has a self check function that can monitor whether all output voltages meet specifications and display them through the green "Supply OK" LED on the power module * board.

Framework interface module

The Rack Interface Module (RIM) is the main interface between the 3500 rack and configuration, display, and status monitoring software. Each frame requires an RIM to be installed in the frame slot adjacent to the power module. RIM supports proprietary protocols that use 3500 Configuration Software 1 to configure the framework and extract framework data and status information for use in the 3500 operator display software. When Bently Nevada condition monitoring software is used in conjunction with the 3500 system, RIM also uses our proprietary data manager ® Protocol connection to the corresponding external communication processor, such as TDXnet ™、 TDIX or DDIX

Etc. The RIM must be located in the rack slot adjacent to the power supply. The RIM contains system OK relay 2, which is triggered by the NOT OK status of the RIM itself and other modules in the framework.

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。