VE4002S1T2B5 KJ3204X1-BA1

产品标题: VE4002S1T2B5 KJ3204X1-BA1 12P3275X022模块

型号： VE4002S1T2B5 KJ3204X1-BA1 12P3275X022

品牌： 艾默生

详情资料

工作原理：

涡轮传感器与前置器形成一个振荡器，振幅随着传感器探头与金属被测物的接近与衰减，衰减的幅度与传感器和被测物之间的距离成正比。出厂前已经使用校准材料42CrMo4对传感器与前置器成套地进行了线性校准，因此安装时不需要再做校准。用户只需要调整传感器和测量面之间的气隙，直至从前置器的输出得到所需信号。

传感器型号：

为了满足测量需要和环境要求，EPRO提供多种型号及配置的涡轮传感器供用户选择。

传感器带有安装螺纹或矩形安装法兰。

测量范围为1mm至20mm。

螺纹尺寸为ф6mm、ф10mm和ф18mm 公制或英制螺纹。

根据型号的不同，传感器可有以下选择：

1、不同螺纹长度；

2、电缆的末端可选择自锁式防水接头或裸线方式；

3、电缆可选择铠装或非铠装；

4、1m电缆处可选择有接头或无接头；

5、适用温度：-35℃-+380℃。

英文资料

Working principle:

The turbine sensor and the preamplifier form an oscillator, and the amplitude decreases as the sensor probe approaches and decays with the metal object being measured. The amplitude of the attenuation is proportional to the distance between the sensor and the object being measured. Before leaving the factory, the calibration material 42CrMo4 has been used to perform a complete linear calibration of the sensor and proximitor, so there is no need for further calibration during installation. The user only needs to adjust the air gap between the sensor and the measuring surface until the desired signal is obtained from the output of the front mount.

Sensor model:

In order to meet measurement needs and environmental requirements, EPRO provides various models and configurations of turbine sensors for users to choose from.

Sensors come with mounting threads or rectangular mounting flanges.

The measurement range is 1mm to 20mm.

Thread size is ф 6mm ф 10mm and ф 18mm metric or inch threads.

Depending on the model, the sensor can have the following options:

1. Different thread lengths;

2. The end of the cable can choose a self-locking waterproof joint or bare wire method;

3. The cable can be armored or non armored;

4. The 1m cable can be selected with or without joints;

5. Applicable temperature: -35 ℃ -+380 ℃.

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。