BENTLY 133442-01监测与保护模块

产品标题：BENTLY 133442-01监测与保护模块工控自动化卡件PLC/DCS备件模块

型号：133442-01

品牌：BENTLY

                                                                              产品详情资料：

BENTLY 133442-01应用于项目元素位置项目属性>选定或声明选项卡项目菜单>新建或修改>添加用户或修改用户目标IP地址目标IP地址属性***一个IP地址，如果控制器与其他设备不在同一子网上，BENTLY 133442-01则使用该IP地址。应用于通信位置Tricon控制器树>配置>硬件分配>增强型TCM设置>路由选项卡Trident控制器树>“配置”BENTLY 133442-01>“硬件分配”>“CM设置”>“路由”选项卡“目标网关IP地址”目标网关IP地址属性***在控制器不在同一子网上时使用的网关设备的IP地址作为其他设备。应用于通信位置Tricon控制器树>配置>硬件分配>增强型TCM设置>网络和路由选项卡Trident控制器树>设置>硬件分配>CM设置>路由选项卡目标IP子网掩码目标IP子网络掩码属性***与IP地址匹配的二进制模式以转换部分主机ID地址字段转换为子网的字段。BENTLY 133442-01

                         产品英文详情料:

Applies To Project elements Locations Item Properties > Selected or Declarations tab Project menu > Security > New or Modify > Add User or Modify User Destination IP AddressBENTLY 133442-01The Destination IP Address property specifies an IP address which is used if the controller is not on the same subnet as other devices. Applies To Communication Locations Tricon Controller tree > Configuration > Hardware Allocation > Enhanced TCM Setup > Routing tab Trident Controller tree > Configuration > HardwareBENTLY 133442-01 Allocation > CM Setup > Routing  tab Destination Gateway IP Address The Destination Gateway IP Address property specifies the IP address of the gateway device which is used if the controller is not on the same subnet as other devices. Applies To Communication Locations Tricon Controller tree > Configuration > Hardware Allocation > Enhanced TCM Setup > Network and Routing tabs Trident Controller tree > Configuration > Hardware Allocation > CM Setup > Routing tab Destination IP Subnet Mask The Destination IP Subnet Mask property specifies the binary pattern that is matched with the IP address to turn part of the host ID address field into a field for subnets.BENTLY 133442-01

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。