PR6423/10R-010 涡流传感器

PR6423/10R-010 涡流传感器

产品详情资料

CON011系列保护等级为IP67,与传感器通过LEMO插头连接。

CON021系列保护等级为IP20，与传感器通过LEMO插头连接。

CON031系列保护等级为IP20,与末端裸线的传感器通过螺钉端子连接。

技术参数：

输入：涡轮传感器PR6422/...～PR6426/...

输出：直流电压上叠加与轴振动成正比的交流电压信号。有开路和短路保护；有反向保护。

输出电压线性范围：-4...-20V(供电电压为-24V）

输出电压的大范围：-1...-22V；

输出电压：-12V（两端对称的测量范围）；

内阻：100k

响应时间：15

精度（所有数据均相对于满量程）

线性误差：

前置器CON0X1  CON0X1/91

连接传感器PR6422：≤1.5%

连接传感器PR6423：≤1.0%  ≤2%

连接传感器PR6424：≤1.5%  ≤2%

连接传感器PR6425：≤6.0%

连接传感器PR6426：≤1.5%  ≤2%

温漂：零点200mV/100K；灵敏度＜2%/100K。

时漂：大0.3%

供电电压的误差：＜0.2%/V

注：CON0X1代表CON011、CON021、CON031

英文产品详细信息

The CON011 series has a protection level of IP67 and is connected to the sensor through an LEMO plug.

The CON021 series has a protection level of IP20 and is connected to the sensor through an LEMO plug.

The CON031 series has a protection level of IP20 and is connected to the sensor with bare wires at the end through screw terminals.

Technical parameters:

Input: Turbine sensor PR6422/...~ PR6426/

Output: An AC voltage signal superimposed on the DC voltage and proportional to the shaft vibration. Equipped with open circuit and short circuit protection; There is reverse protection.

Linear range of output voltage: -4... -20V (supply voltage is -24V)

Large range of output voltage: -1... -22V;

Output voltage: -12V (symmetrical measurement range at both ends);

Internal resistance: 100k

Response time: 15

Accuracy (all data relative to full scale)

Linear error:

Proximitor CON0X1 CON0X1/91

Connect sensor PR6422: ≤ 1.5%

Connect sensor PR6423: ≤ 1.0% ≤ 2%

Connect sensor PR6424: ≤ 1.5% ≤ 2%

Connect sensor PR6425: ≤ 6.0%

Connect sensor PR6426: ≤ 1.5% ≤ 2%

Temperature drift: 200mV/100K at zero point; Sensitivity<2%/100K.

Time drift: 0.3% larger

Error of power supply voltage: ＜ 0.2%/V

Note: CON0X1 represents CON011, CON021, and CON031

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。