本特利330180-51-CN3300XL前置器传感器

分类： Bently本特利

型号： 330180-51-CN

Bently 3300 XL 8mm 接近传感器系统包含一个 3300 XL 8mm 探头、一根 3300 XL 延长电缆和一个 3300 XL 前置器。该系统提供了一个 与探头和观察到的距离成正比的输出电压 导电表面，可以测量静态（位置）和动态（振动）值。这 系统的主要应用是流体薄膜轴承机器上的振动和位置测量， 以及键相参考和速度测量。标准 3300 XL 8 毫米 5 米 系统还符合美国石油学会 (API)  用于机械配置、线性范围、精度和温度稳定性。所有 3300 XL 8 毫米 接近传感器系统提供这种级别的性能并支持互换性 探头、延长电缆和前置器传感器，无需匹配或工作台校准 个别组件。

以下规格适用于 3300 XL NSv 前置器、延长电缆和探头 

在 0°C 和 +45°C（+32°F 到 +113°F）之间，使用 -24 Vdc 电源、10 kΩ 负载、Bently 

Nevada 提供直径为 31 毫米（1.2 英寸）或更大的 AISI 4140 钢靶，以及一个探针间隙 

1.0 毫米（40 密耳）。系统精度和互换性规范不适用时 

使用针对本特利 AISI 4140 钢目标以外的任何目标校准的换能器系统。
3500/06,3500/08,3500/15,3500/20,3500/22M,3500/25,3500/32,3500/33,3500/34,3500/40M,

3500/42,3500/65 184469-01, 3500/44M, 3500/45, 3500/46, 3500/50, 3500/53, 3500/60, 3500/61, 

3500/62, 3500/64M, 3500/65, 3500/70M, 3500/60, 3500/65,3500/72M,3500/77M, 3500/90, 

3500/33, 3500/33 149992-01, 3500/33 149986-01, 3500/53, 3500/53 133388-01, 3500/53 133396-01, 

3500/65 184522-01, 3500/92, 3500/92 136180-01, 3500/92(136180-01), 3500/15 125840-01, 

3500/15 133300-01, 3500/15 127610-01

The Bently 3300 XL 8mm Proximity Sensor System includes a 3300 XL 8mm probe, a 3300 XL extension cable, and a 3300 XL Proximitor. The system provides an output voltage conductive surface that is proportional to the probe and the observed distance, and can measure static (position) and dynamic (vibration) values. The main applications of this system are vibration and position measurement on fluid film bearing machines, as well as keyphase reference and velocity measurement. The standard 3300 XL 8mm 5m system also conforms to the American Petroleum Institute (API) for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8mm proximity sensor systems provide this level of performance and support interchangeable probes, extension cables, and Proximitor sensors without the need for matching or bench calibration of individual components.

The following specifications apply to the 3300 XL NSv Proximitor, Extension Cable, and Probe

Between 0 ° C and+45 ° C (+32 ° F to+113 ° F), use a -24 Vdc power supply, 10 k Ω load, Bently

Nevada offers AISI 4140 steel targets with a diameter of 31 millimeters (1.2 inches) or larger, as well as a probe gap

1.0 mm (40 mils). When system accuracy and interchangeability specifications are not applicable

Use a transducer system calibrated for any target other than the Bentley AISI 4140 steel target.

3500/06,3500/08,3500/15,3500/20,3500/22M,3500/25,3500/32,3500/33,3500/34,3500/40M,

3500/42,3500/65 184469-01, 3500/44M, 3500/45, 3500/46, 3500/50, 3500/53, 3500/60, 3500/61,

3500/62, 3500/64M, 3500/65, 3500/70M, 3500/60, 3500/65,3500/72M,3500/77M, 3500/90,

3500/33, 3500/33 149992-01, 3500/33 149986-01, 3500/53, 3500/53 133388-01, 

3500/65 184522-01, 3500/92, 3500/92 136180-01, 3500/92(136180-01), 3500/15 125840-01,

3500/15 133300-01, 3500/15 127

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。