IS220PDIOH1A模块GE卡件

IS220PDIOH1A模块卡件IS420UCSBH4ADCS系统备件

IS220PDIOH1A模块卡件IS420UCSBH4ADCS系统备件

                                                      产品详情资料：

IC698CPE010 是 GE Fanuc RX7i 系列的中央处理器。该设备能够实时控制工业机械和材料过程。它通过安装在机架上的 VME64 连接背板与其他设备和模块进行通信。

IC698CPE010 具有能够执行浮点计算的 300MHz Celeron 微处理器。每个布尔函数的标准速度是每个线圈 0.33 毫秒。该设备的其他功能包括但不限于以下内容：三个嵌入式串行端口和两个以太网端口、字内引用支持、符号变量支持、测试编辑模式和网络数据监控。

该设备有 10 兆字节的 RAM 内存用于数据和编程信息。该内存由 CMOS 电池供电。还提供了额外的 10 兆字节非易失性闪存 (NVRAM)。操作系统固件数据存储在闪存中。无需拆开设备或更换 EPROM 即可更新固件。

有两种操作IC698CPE010的方法：三位置运行/停止开关和将设备连接到计算机并运行适当的软件。可以通过串行端口或以太网端口将此设备连接到计算机。注意：使用以太网端口需要 IP 寻址和 Cat5 电缆。对于串行连接，使用 SNP 协议。对于该设备的配置和编程，在连接的计算机上使用 Proficy Machine Edition PLC-Logic Developer 软件。配置数据使用密码保护。

安装 IC698CPE010 时，请按照产品手册中的说明进行操作。禁用机架电源。记录设备的媒体访问控制 (MAC) 地址。将设备牢固地安装并接地到机架的第一个插槽，即指定的 CPU 插槽中。连接以太网和串行端口。重新启用机架的电源。将 CMOS 电池连接到连接器之一。开始对设备进行编程。

                                                    产品英文详情资料：

IC698CPE010 is the central processing unit of the GE Fanuc RX7i series. This device can control industrial machinery and material processes in real-time. It communicates with other devices and modules through the VME64 connection backplane installed on the rack.

IC698CPE010 has a 300MHz Celeron microprocessor capable of performing floating-point calculations. The standard speed for each Boolean function is 0.33 milliseconds per coil. The other functions of this device include but are not limited to the following: three embedded serial ports and two Ethernet ports, intra word reference support, symbolic variable support, test editing mode, and network data monitoring.

This device has 10 megabytes of RAM memory for data and programming information. This memory is powered by a CMOS battery. An additional 10 megabyte non volatile flash memory (NVRAM) is also provided. The operating system firmware data is stored in flash memory. You don't need to disassemble the device or replace the EPROM to update the firmware.

There are two methods to operate IC698CPE010: a three position run/stop switch and connecting the device to a computer and running appropriate software. This device can be connected to the computer through a serial or Ethernet port. Note: Using Ethernet ports requires IP addressing and Cat5 cables. For serial connections, use the SNP protocol. For the configuration and programming of this device, use the Proficy Machine Edition PLC-Logic Developer software on the connected computer. Configure data to be password protected.

When installing IC698CPE010, please follow the instructions in the product manual. Disable rack power. Record the Media Access Control (MAC) address of the device. Firmly install and ground the equipment to the first slot of the rack, the designated CPU socket. Connect Ethernet and serial ports. Re-enable the power supply to the rack. Connect the CMOS battery to one of the connectors. Start programming the device.

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。