监测卡件A6500-UM TSI AMS6500

厦门阿米控技术有限公司

产品介绍

PlantCruise操作站(HMIWeb)

● 基于霍尼韦尔的HMlWeb技术
● 支持中文界面
● 可视方案图，控制策略设计图的实时监视显示PlantCruise软件
● 监控软件提供高速缓存区的实时动态数据存取、趋势、报警/事件处理、管理、报表报告生成等功能
● 系统组态环境PlantCruise组态工作室包括：
◎ 企业模型组态软件Simplified Enterprise ModeIBuilder，对企业中的资产按分级结构直观地描述、显示
◎ 控制策略组态软件ControI BuiIder，为生成控制策略提供全套控制算法库
◎ 系统资源组态软件Quick Builder，用于创建系统硬件
◎ 用户画面组态软件HMIWeb Display BuiIde，用于创建基于HTML格式的操作员图形界面

● 强大的数据交换功能
● 多种其它应用(Uniformance PHD、eServer、EBM等)PlantCruise仿真控制器(SIM)
● 仿真PlantCruise系统
● 基于PC的仿真控制器环境，无须控制器硬件

 监测卡件A6500-UM TSI AMS6500

产品详情资料

EPRO系列PR6423/010-140+CON021振动传感器原装供应库存稳定基于可靠性设计，考虑使用寿命，确保在出现故障时仍然可以启动故障设备。这些系统能应对紧急情况下的中断。设备可靠性需要通过系统性能来衡量：可靠性越高能够抵御意外和恶劣环境变化的能力越强。因此，可靠性要求应该是风电 GE电气模块 DCS系统的重要指标之一。目前该系统在可靠性方面主要针对以下两个方面进行改进：首先是针对低海拔地区，为设备在高海拔地区正常运行，对风机电气模块供电要求更高；其次是针对长时间运行而增加的高强度部件更换要求，该部件也需要时间内具有足够强的承受能力、确保其能够承受高强度作业以及高温环境对部件影响、提供寿命；EPRO系列PR6423/010-140+CON021振动传感器后是针对风电场项目应用设计中存在一些特殊问题导致高强度部件在安装期间存在局部损坏而导致系统无法正常工作等情况下造成故障的情况提出了更高要求。GE通用电气燃气机组模块可提供多种控制策略，可根据客户需求及工况变化来进行优化。例如，当机组处于高负荷运行状态时，可针对工况提供优控制策略；当设备处于低负荷运行状态时，可针对每个运行工况设定控制策略（例如图3所示）。GE通用电气燃气机组系列模块通过将系统参数与通用电气燃机模块参数组合，降低了风能回路电压波动率、温度波动率，提高了叶片风振特性，EPRO系列PR6423/010-140+CON021振动传感器减少了机组运行中的振动噪音、振动频率等影响。同时提高了风机轴承、叶片等部件效率，降低了故障频率与运行时间等。EPRO系列PR6423/010-140+CON021振动传感器原装供应库存稳定这些措施对于风机运行有着非常重要的意义；同时也会带来可观的经济效益。EPRO系列PR6423/010-140+CON021振动传感器以通用电气 HMP燃气机组系列模块为例。EPRO系列PR6423/010-140+CON021振动传感器原装供应库存稳定该系统配置了由风轮转速传感器、功率器件、电气连接模块、电气控制单元组成的风轮转速传感器模块等组成。

英文产品详细信息

EPRO series PR6423/010-140+CON021 vibration sensors have stable original supply inventory based on reliability design, and service life must be considered to ensure that faulty equipment can still be started in the event of a malfunction. These systems must be able to cope with safety interruptions in emergency situations. Equipment reliability needs to be measured by system performance: the higher the reliability, the stronger the ability to withstand unexpected and harsh environmental changes. Therefore, reliability requirements should be one of the important indicators of the wind power GE electrical module DCS system. At present, the reliability of the system is mainly improved in the following two aspects: firstly, it is aimed at low altitude areas, which require higher power supply requirements for the fan electrical module to ensure normal operation of equipment in high altitude areas; Secondly, there are additional requirements for replacing high-strength components due to long-term operation. This component also needs to have sufficient load-bearing capacity within a certain period of time to ensure that it can withstand high-strength operations and the impact of high-temperature environments on the components, and provide a lifespan; The EPRO series PR6423/010-140+CON021 vibration sensor has put forward higher requirements for the design of wind farm projects, which have special problems that cause local damage to high-strength components during installation, resulting in the system being unable to function properly and causing malfunctions. The GE General Electric gas turbine module can provide multiple control strategies that can be optimized based on customer needs and changes in operating conditions. For example, when the unit is in a high load operating state, optimal control strategies can be provided for the working conditions; When the equipment is in a low load operating state, control strategies can be set for each operating condition (as shown in Figure 3). The GE General Electric gas turbine series modules reduce the voltage and temperature fluctuations of the wind energy circuit and improve the wind vibration characteristics of the blades by combining system parameters with the parameters of the General Electric gas turbine module. The EPRO series PR6423/010-140+CON021 vibration sensors reduce the impact of vibration noise, vibration frequency, and other factors during unit operation. At the same time, it improves the efficiency of components such as fan bearings and blades, and reduces fault frequency and operating time. The EPRO series PR6423/010-140+CON021 vibration sensor has a very important significance for the operation of the wind turbine by stabilizing the original supply inventory; At the same time, it will also bring considerable economic benefits. The EPRO series PR6423/010-140+CON021 vibration sensor takes the General Electric HMP gas turbine series module as an example. The EPRO series PR6423/010-140+CON021 vibration sensors are supplied in stock and are stable. The system is equipped with a wind turbine speed sensor module composed of wind turbine speed sensors, power devices, electrical connection modules, and electrical control units.

       监测卡件A6500-UM TSI AMS6500

3500系列组成部分概述：

3500/70M往复压缩机冲击/速度监测器

3500/72M 活塞杆位置监测器

3500/77M 汽缸压力监测器

3500/63 气体监测器

3500/92 通讯网关

3500/93 LCD 显示装置

3500/94 VGA 显示装置

3500/95 系统综合 PC 显示装置 

3500/40M Proximitor? 监测器模块：通道类型-径向振动、轴向位移、偏心、差胀

3500/42M Proximitor? /位移/速度加速度监测器模块：通道类型-加速度、速度、轴振动

3500/45 位置监测器模块：通道类型-轴向位移、差胀、斜面差胀、壳胀、阀门位置

免责声明：

免责声明： AMIKON我们销售新产品和停产产品，渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。