330130-040-01-00机组监测系统

3300XL 330130-040-01-00机组监测系统 330130-045-00-00

3300XL 330130-040-01-00机组监测系统 330130-045-00-00

                                                      产品详情资料：

TX/RX 指示灯: 当键相器模块与框架接口模块(RIM)进行通讯时，发出指示。

1) 缓冲的传感器输出  

2) I/O 模块，绝缘内部端子  

3) I/O 模块，绝缘外部端子  

4) I/O 模块，非绝缘内部端子  

5) I/O 模块，非绝缘外部端子  

6) 带栅的I/O 模块，内部端子 

本特利3500/25键相器模块上一个半高度、双通道模块，该模块用于给3500框架的监测模块提供键相信号。这个模块接收来自电涡流传感器或者电磁传感器的输入信号，并且将该信号转换为数字键相信号，该信号在当轴上的键相位标记在键相传感探头之下时指示出来。3500监测系统可以接收4个键相信号。每个键相信号都是一个数字同步信号脉冲、用于监测模块和外部诊断设备测量矢量参数诸如1X倍频振幅和相位。

单键相传感器方式

这种布置方式只要求有一个键相传感器。从传感器接收的信号利用电缆输入到两个键相器模块。

当应用TMR方式时，只提供了两个转速测点。

获得的数据

键相器模块从每个键相传感器记录所测的转速值。转速作为一个基本参量被通讯网关模块和框架接口模块使用。键相器模块还可以返回模块和通道状态。

                         产品英文详情资料：

TX/RX indicator light: When the Keyphasor module communicates with the Rack Interface Module (RIM), an indication is issued.

1) Buffered sensor output

2) I/O module, insulated internal terminals

3) I/O module, insulated external terminals

4) I/O module, non insulated internal terminals

5) I/O module, non insulated external terminals

6) I/O module with barriers, internal terminals

A half height, dual channel module on the Bentley 3500/25 Keyphasor Module, which is used to provide keying signals to the monitoring modules of the 3500 rack. This module receives input signals from eddy current sensors or electromagnetic sensors and converts them into digital keyphase signals, which are indicated when the keyphase markings on the shaft are below the keyphase sensing probe. The 3500 monitoring system can receive four key signals. Each key signal is a digital synchronous signal pulse used for monitoring modules and external diagnostic equipment to measure vector parameters such as 1X octave amplitude and phase.

Single keyed phase sensor method

This arrangement only requires one keyphase sensor. The signal received from the sensor is input to two keyphasor modules using cables.

When applying TMR mode, only two speed measurement points are provided.

Obtained data

The keyphasor module records the measured speed value from each keyphasor sensor. The speed is used as a basic parameter by the communication gateway module and framework interface module. The keyphasor module can also return module and channel status.

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。