产品中心
本特利 3500/72M
本特利 3500/72M
产品详情资料:
本特利(bently)991单通道轴位移变送器用于机器轴振动监测,如离心式空气压缩机、风机、小型水泵、电机等机组,将振动信号按照比例变送成4至20mA信号,提供给设备的控制系统PLC或DCS。本特利(bently)991单通道轴位移变送器是双线回路供电的设备,可接受bently3300 XL NSv接近探头的输入信号及其匹配的延长电缆(有5米和7米的系统长度可供选择)。变送器可将信号调整为相应的振动峰值单位,并将此值按比例变成4 至 20mA 的工业标准输入信号提供给控制系统1, 以便机组的保护、报警和逻辑控制。
与bently 3300 XL NSv 接近探头兼容,传感器可安装在下间隙、典型式的离心式空气压缩机狭小区域中。
输入:接受1个非接触式的3300 NSv接近探头和延长电缆。
电源:变送器终端需要 +12 至 +35 Vdc 的输入。
输出:规定的全量程范围内两线制的4 至 20 mAdc
准确性:在±1.5% 规定的全量程范围内
线性范围:0.5至1.75 mm (20 至 55 mil)
灵敏度:7.87 mV/μm (200 mV/mil) ± 6.5%
危险区域认证:CSA/NRTL/C、ATEX
产品英文详情料:
Bently 991 single channel shaft displacement transmitter is used for monitoring machine shaft vibration, such as centrifugal air compressors, fans, small water pumps, motors, and other units. The vibration signal is proportionally converted into 4 to 20mA signals and provided to the control system PLC or DCS of the equipment. The Bently 991 single channel axial displacement transmitter is a dual wire loop powered device that can accept input signals from the Bently 3300 XL NSv proximity probe and its matching extension cable (available in system lengths of 5 and 7 meters). The transmitter can adjust the signal to the corresponding vibration peak unit and proportionally convert this value into an industrial standard input signal of 4 to 20mA, providing it to control system 1 for unit protection, alarm, and logic control.
Compatible with Bently 3300 XL NSv proximity probes, the sensor can be installed in narrow areas of typical centrifugal air compressors with lower clearances.
Input: Accepts 1 non-contact 3300 NSv proximity probe and extension cable.
Power supply: The transmitter terminal requires an input of+12 to+35 Vdc.
Output: 4 to 20 mAdc in a two wire system within the specified full range
Accuracy: Within ± 1.5% of the specified full range range range
Linear range: 0.5 to 1.75 mm (20 to 55 mils)
Sensitivity: 7.87 mV/ μ m (200 mV/mil) ± 6.5%
Hazardous Area Certification: CSA/NRTL/C, ATEX
免责声明:
AMIKON我们销售新产品和停产产品,独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的,并不表示与任何权利持有人有任何关联或授权。
GE IC693CPU372 | Woodward 5417-028 | Honeywell 8C-TDIL01 51306856-175 |
GE IC693DSM302 | Woodward 5417-040 | Honeywell 8C-PAIN01 51454356-175 |
GE IC693MDL330 | Woodward 5417-175 | Honeywell 8C-PAINA1 51454470-175 |
GE IC693MDL646 | Woodward 5437-672 | Honeywell 8C-PAON01 51454357-175 |
GE IC693MDL740 | Woodward 5461-644 | Honeywell 8C-PAIN01 51454356-175 |
GE IC693MDL753 | Woodward 5461-655 | Honeywell 8C-TDIL11 51306858-175 |
GE IC693PBS105 | Woodward 5462-916 | Honeywell 8C-TAIX51 51306979-175 |
GE IC693BEM321 | Woodward 5464-211 | Honeywell 8C-TAIDB1 51307133-175 |
GE IC693MDL231 | Woodward 5464-643 | Honeywell 8CTPOX01 51307022-175 |